The information below is only offered as a guide please talk to us direct for more detailed information.
Thickness: We can toughen all available thickness between 3mm and 19mm.
Maximum Size: 3000mm x 9000mm Minimum Size: 300mm x 100mm
Edge Work: All edges should be either arrissed or polished
Cut Outs: Various intricate cut outs, letter box openings etc can be processed by AJJ Glass, please submit drawing for verification on these tolerances prior to manufacture.
Tolerances: Length +/- 1mm, Width +/- 1mm
Distance between holes or hole and glass edge: A minimum of twice the glass thickness. Thickness and weight:
Nominal Thickness
Thickness Tolerance
Weight per Squaremeter
4mm
3.8-4.2mm
10kg
5mm
4.8-5.2mm
12.5kg
6mm
5.8-6.2mm
15kg
8mm
7.8-8.2mm
20kg
10mm
9.7-10.3mm
25kg
15mm
14.7-15.mm
37.5kg
Thermal endurance: The glass should not be subjected to temperatures in excess of 300 deg. C. If the glass is to be subject to thermal shock then 180 deg C should not be exceeded.
Colour: Most non-metallic colours are available in gloss or matt finishes. Some transparent colours and a range of metallic colours are also available.
Storage recommendations:Glasses should be stored on their edge and kept dry. Ideally they should be placed on wooden strips or a soft material. Special care should be taken to protect the edges of the glass.
Assembly recommendations: The method of holding the glass should ensure that the glass is not subjected to any unnecessary stress over the whole range of temperatures to which it will be subjected. It is advisable to avoid contact with hard materials. If this is not possible the material must be flat and free from burrs. The edges and walls of any holes drilled in the glass must be protected from screw threads.
